Custom Masonic Ring

Freemasonry has existed for generations and takes advantage of symbols from its origins in the artwork of building, these types of as the square and compas that are the most emblematic symbols of freemasonry around the environment.

These are the basic applications of the builders of the ancient time, when the freemasonry emerged back again in the 13th century in England.

It ought to be noted that these symbols are also shared with the companions of duty and other workers’ guilds all around the entire world, which enable us recognize the impression freemasonry experienced beyong its inner circle.

It is for that reason standard to see on most masonic rings these symbols reproduced in the type of engravings or moldings.

In the situation of the job presented listed here, it is an 18-karats white-gold Freemason ring surmounted by a organic onyx stone receiving in its center the square and the 18-karats yellow gold compass.

gold masonic ring with black onyx

Freemason ring built in 18 carat white and yellow gold, via our custom-manufactured ring development company

Here are a couple illustrations of other masonic ring patterns tailor made built in our workshop:

custom masonic ring made of 18k yellow gold customized masonic ring design in gold

Freemason tailor made ring style

As a freemason, our consumer wished to get a one of a kind freemason ring design and style no a person was previously sporting on this finger. He desired a huge ring, with big components enabling a special personnalization of his ring.

He was hence intrigued by a ring of ours he needed to modify in a distinctive manner, this big doble headed eagle ring from our signet rings collection.

gold eagle signet ring

Big diamond eagle ring that impressed our consumer for the development of a exceptional custom-made masonic ring

Following the request of our customer, we created a new CAD product of the ring, eliminating all the diamonds from the shank, including initials and crosses instead. We also taken out the large gold plate on the higher plate to swap it by a large black onyx stone carved and surmounted by a massive Masonic symbols in yellow 18k gold.

 

In this article you can see the end result of our modelization of his dreamed ring design.

custom masonic gold ring made on demand

Renderized sights of the masonic ring venture in advance of beginning the earning of the ring

The moment the customer could validate the design and style, being in accordance to his wants, we could get started the earning of this sort of a enormous ring.

Creating of the shank and gold masonic symbols

From the CAD producing of the ring designed earlier, we can start the 3D printing of the differnt elements of our ring undertaking. Whilst the ring dimensions is US 9, the ring’s element are quire significant due to the fact of the ring’s layout with a total gold excess weight of 15 grams at the time the ring will be concluded.

3d printed parts of masonic custom ring

 View of the 3D printed resin components of the ring earlier to the casting approach

We use these elements to make a 18k gold casting utilizing the lost-wax casting procedure, this approach is know to mankind because thousands of years. So we get just the exact same pieces as printed, manufactured of 18k white and yellow gold.

casting of masonic custom ring parts

Look at of our casting rod with two white gold ring shanks found rough from casting

white gold masonic ring rough from casting

Element look at of the engravings on the ring shank built of 18 white gold

masonic symbols in yellow gold

Masonic image in 18 karat yellow gold immediately after the casting method and in advance of detailing it adequately to make a superior separation in between the sq. and the compas

two parts of the ring body of the masonic ring

Check out of the white gold ring shank and the yellow gold interior ring forged for this freemason ring undertaking

After the pieces are cast in gold, we will need to deburr them and pre-polish them to start their assembly by welding.

gold ring parts welded together

Here is a element perspective of the shank assembled with the interior ring when on the right you can see the specific sq. and compas masonic image

At this stage, we require the onyx stone to continue on producing the ring.

Tailor made Carving of the Onyx Stone 

When this tailor made ring is a massive challenge, hefty and with several areas, the carving of the black onyx stone is by significantly the most sophisticated stage for this task. Black onyx is very an inexpensive gemstone, but the carving of these kinds of a huge and complicated cabochon built this component the one we shell out the most time on.

onxy stone carving

Below you have an strategy of the complicated geometry of the onyx stone essential for the ring, sophisticated and beautiful, in line with the masonery spirit

As the onyx cabochon will need to insert properly in the upper part of the shank, we couldn’t count on a stone cutter from the outside and we experienced to carv this stone in-home to regulate it properly to the ring.

We get started the carving from a large block of natural black onyx tough, lower with a diamond disc and h2o. You can see listed here soon after all the techniques that remodeled a rough onyx piece of stone into a elaborate and perfect piece for our ring job.

cutting a rough onyx stone

The onyx stone is fragile, it ought to be cooled when it is lower to prevent it from breaking because of excess of heat

We obtain a piece that is reworked by successive cuts so as to steadily give it the form of a rounded cross.

onyx cutting process

Look at of the stone mounted on a wodden support with jeweler’s wax to rework the contours of the stone

Then, many measures of filing the stone with smoother grips allow for us to receive a good shiny black floor for the onyx stone.

sanding the onyx stone with sandpaperHere you can see the grip glued to a flat piece of wooden and the stone glued the the picket stick. The upper curve of the cabochon is created by hand with this system.

shaping the onyx stone step by step

The onyx stone becoming polished to give it its convex curvature

onyx stone finished after polishing

Finished stone right after sharpening whre you can appreciate the luster and the upper curve of the cabochon

The stone is then perforated with two little holes in which are mounted and glued the lugs of the Masonic symbol.

Here is a online video summary of the various steps of the size of the onyx cabochon:

https://www.youtube.com/check out?v=5QxoGuqDvms

Subsequent the last sprucing of the ring, we can value the end result of the do the job done:

gold masonic custom ring

The custom made masonic ring noticed from various perspectives

internal view of a masonic ring

gold masonic ring wore on finger

 While the ring sizing of the ring is regular, the ring is significant and incredibly noticeable on the finger, with a overall bodyweight of 15 grams in 18k gold

 

Right here are a lot more jobs of jewelry in relation with the freemason or showing a similiar work with custom-made spiritual rings:

 

Extra information and facts:

Leave a Reply